Vinco Manufacturing, Inc. - Warning!
Warning!
8' Plumb-Jack Warning!
Warning: Place Plumb-Jack 8' o.c.
Do not utilize on walls in excess of 10' in height. Do not
expose more than 6" of thread at either end of this tool.
Do not use less than (4) 3/16" x 2-1/2" wood hex head lag
screws to secure to the face of the stud, and to floor
joist for wood construction, or less than (2) 1/4" x 3"
tapcons to secure to concrete floor. Wind velocity in
excess of 50 mph would require extra bracing. Failure to
follow warning instructions may result in serious bodily
injury or death.
12' Plumb-Jack Warning!
Warning: Place Plumb-Jack 8' o.c.
Do not utilize on walls in excess of 12' in height. Do not
expose more than 6" of thread at either end of this tool.
Do no expose more than 6" of thread at either end of this
tool. Do not use less than (4) 3/16" x 2-1/2" wood hex
head lag screws to secure the Plumb-Jack to the face of the
stud, and to floor joist for wood construction, or less
than (2) 1/4" x 2-1/2" tapcons to secure to concrete floor
or 3/4" x 2' steel stake driven into the ground when the
Plumb-Jack is used on the outside of the exterior walls.
Wind velocity in excess of 50 mph would require extra
bracing. Failure to follow warning instructions may result
in serious bodily injury or death.
