Installation
|
Step #1
The Plumb-Jack mounting bracket ends are screwed
out to the desired length. For an 8' wall the
threads should be backed out 1" - 2", 9' walls 2" - 3", and if
used on a 10' wall no more than 6" |
|
|
Step #2 The top bracket is installed with two #10 wood hex-head screws, 2-1/2" in length.(A 2 1/2" x 3/16" pole barn screw can also be used.)
|
|
|
Step #3 The bottom end of the Plumb-Jack is attached to the floor, at the floor joist with two #10 wood hex head screws, 2-1/2" in length. Or on a concrete floor with two 2-1/2" x 1/4" tapcons. |
|
|
Step #4 After the Plumb-Jacks have been installed at the recommended 8' intervals along the wall. The wall can be easily plumbed by simply making a few quick & easy turns to the Plumb-Jack bars. |
|
